Cisco Systems - OL-12603-01

Below are all the different types of Cisco Systems. Select the device of your choice, to download the manual

Contents

APC Power Strips This chapter contains the following sections Setting the APC System BIOS page 9 1 Entering the APC Configuration into VFrame GUI page 9 2 Setting the APC System BIOS If you are using an APC power strip for power control of the physical servers use the recommended system BIOS setting for the physical server Failure to change this setting appropriately can cause the server not to boot in some cases To set the APC system BIOS follow these steps Step 1 Enter the BIOS Utility Setup for the physical server Step 2 Locate the Advanced settings The setting you need to verify is located in the Advanced or ACPI Settings section and is usually labeled After Power Failure The desired setting allows the server to turn on whenever ...